1/2" Lead Free Brass Barb Insert Elbow, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle, Secure Barb Ends Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" lead free brass barb insert elbow, for connecting 2 pieces of 1/2" cross link polyethylene pex tubing at a 90 degree angle, secure barb ends of fitting to pex pipe with tv #608-933 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 & astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet ab1953 California & vt s152 Vermont low lead restrictions.www.p65warnings.ca.gov
Manufacturer Part Number
This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov